Uncategorized
Showing 1–40 of 56 results

CSB-210-G GM Gen V Main Exhaust Manifold FULL KIT
Kit includes:
-Template.
-Bushing Clamp (Qty 3) sizes 3/16 17/64 and Letter P.
-Drills and Taps (Qty 1 ea.) 3/16 17/64 and Letter P with m8x1.25 Tap.
-Manibolt thumbscrew for mounting Bushing Clamps.
-M8x1.25 Stainless Flatheads (Qty 4).
-Rugged plastic case with laser cut foam fitted for dedicated placement.

CSB-211-G GM Duramax 6.6 L5P Main Exhaust Manifold FULL KIT
Kit includes:
-Template.
-Bushing Clamp (Qty 3) sizes 3/16 17/64 and Letter P.
-Drills and Taps (Qty 1 ea.) 3/16 17/64 and Letter P with m8x1.25 Tap.
-Manibolt thumbscrew for mounting Bushing Clamps.
-M8x1.25 Stainless Flatheads (Qty 4).
-Rugged plastic case with laser cut foam fitted for dedicated placement.

CSB-013-F 3.5-3.7 Duratec 3.5 Eco Boost Full Kit
Kit includes:
-Template.
-Bushing Clamp (Qty 3) sizes 3/16 17/64 and Letter P.
-Drills and Taps (Qty 1 ea.) 3/16 17/64 and Letter P with m8x1.25 Tap.
-Manibolt thumbscrew for mounting Bushing Clamps.
-M8 Stainless Flatheads (Qty 4).
-Rugged plastic case with laser cut foam fitted for dedicated placement.

CSB-012-F Ford 6.2
Requires Stud/Nut M10x1.25 for mounting either on existing Studs or available hole (Qty 3).

CSB-011-F Ford 5.0 Coyote
Requires Stud/Nut M10x1.25 for mounting either on existing Studs or available hole (Qty 3).

CSB-012-F Ford 6.2 Full Kit
Kit includes:
-Template.
-Bushing Clamp (Qty 3) sizes 3/16 1/4 and 11/32.
-Drills and Taps (Qty 1 ea.) 3/16 1/4 and 11/32 with m10x1.25 Tap.
-Manibolt thumbscrew for mounting Bushing Clamps.
-Stud/Nut M10x1.25 for mounting either on existing Studs or available hole (Qty 3).
-Rugged plastic case with laser cut foam fitted for dedicated placement.

CSB-011-F Ford 5.0 Coyote FULL KIT
Kit includes:
-Template.
-Bushing Clamp (Qty 3) sizes 3/16 1/4 and 11/32.
-Drills and Taps (Qty 1 ea.) 3/16 1/4 and 11/32 with m10x1.25 Tap.
-Manibolt thumbscrew for mounting Bushing Clamps.
-Stud/Nut M10x1.25 for mounting either on existing Studs or available hole (Qty 3).
-Rugged plastic case with laser cut foam fitted for dedicated placement.

Universal Drill Guide System
[embed]https://youtu.be/tdEbjfMg0Jg[/embed]
Universal Drill Guide includes:
- Four, Eight and Twelve inch mounting Rails.
- Guide pin, for broken fasteners under flush resulting in faster mounting.
- Three sets of mounting inserts, supports Flathead fasteners from M6X1.0 to M10X1.5 / 1/4-20 to 3/8-16.
- Drills (Qty 1 ea.) 3/16, 1/4, 5/16 and 21/64. (.1875, .250, .3125 and .3281)
- Four Removable drill guides complimenting sizes mentioned.
- Instructions on usage and drill selection chart.
- All items placed in laser cut foam inserted in a durable plastic case.

Custom Case
Available for new and returning customers. We now offer the ability to protect your tools in laser cut foam lined plastic cases. E-mail your request and specify what product you have or use your order to show us what you need. Some orders may require more than one case. Contact us to see what you can fit. Please allow up to 24 hours for your order to ship.

Laser Engraving
Do you want to personalize your tools? Maybe add your name or any other text on them? We will place the information provided on the best suggested area of the tool. Use the "Contact us" tab on the left and submit a 50 characters max after your order. Engraving will not be done if not purchased.

M8 Conical Washers
These Conical Washers are required for applications when
8mm studs are used on the cylinder head. Comes with
stainless m8x1.25 nuts and washers. These will also fit
any application that has 5/16-18 Studs.

Manibolt Thumb Screw
Manibolt thumb screw allows you to comfortably mount the
Bushing Clamp to the template. At least one is required
for using this product.

CSB-209-G CADILLAC 368-425-472-500
Click Here To Purchase
Kit includes: -Template. -Bushing Clamp (Qty 3) sizes 3/16 1/4 and 5/16. -Drills and Taps (Qty 1 ea.) 3/16 1/4 and 5/16 with 3/8-16 Tap. -Knurled Thumbscrew for mounting Bushing Clamps. -Modified 3/8-16 Stainless Flatheads (Qty 4). -Rugged plastic case with laser cut foam fitted for dedicated placement.
CSB-203-G GM SB CHEVY FULL KIT
Kit includes:
-Template.
-Bushing Clamp (Qty 3) sizes 3/16 1/4 and 5/16.
-Drills and Taps (Qty 1 ea.) 3/16 1/4 and 5/16 with 3/8-16 Tap.
-Manibolt thumbscrew for mounting Bushing Clamps.
-Modified 3/8-16 Stainless Flatheads (Qty 4).
-Rugged plastic case with laser cut foam fitted for dedicated placement.

Bushing Clamp 17/64
Minor Diameter for the m8x1.25 Note: Having used
the 1/4 Bushing Clamp, this size will help cut out the
remaining thread.

Bushing Clamp 1/4
This size is perfect for drilling most of
the m8x1.25 fastener; this will leave a
.0078 wall to the minor diameter intact.
Helical Insert Tap Drill size for m6x1.0

CSB-001-F Ford 6.0-6.4 FULL KIT
Kit includes:
-Template.
-Bushing Clamp (Qty 3) sizes 3/16 17/64 and Letter P.
-Drills and Taps (Qty 1 ea.) 3/16 17/64 and Letter P with m8x1.25 Tap.
-Manibolt Thumbscrew for mounting Bushing Clamps.
-M8 Stainless Flatheads (Qty 4).
-Rugged plastic case with laser cut foam fitted for dedicated placement.

CSB-003-F Ford 460 7.5 FULL KIT
Kit includes:
-Template.
-Bushing Clamp (Qty 3) sizes 3/16 1/4 and 5/16.
-Drills and Taps (Qty 1 ea.) 3/16 1/4 and 5/16 with 3/8-16 Tap.
-Manibolt thumbscrew for mounting Bushing Clamps.
-Modified 3/8-16 Stainless Flatheads (Qty 4).
-Rugged plastic case with laser cut foam fitted for dedicated placement.

CSB-004-F Ford 7.3 Power Stroke FULL KIT
Kit includes:
-Template.
-Bushing Clamp (Qty 3) sizes 3/16 1/4 and Letter P.
-Drills and Taps (Qty 1 ea.) 3/16 1/4 and Letter P with m10x1.5 Tap.
-Manibolt thumbscrew for mounting Bushing Clamps.
-Modified m10x1.5 Stainless Flatheads (Qty 4).
-Rugged plastic case with laser cut foam fitted for dedicated placement.

CSB-005-F Gasket 6N640-A (70MM) FULL KIT
Kit includes:
-Template.
-Bushing Clamp (Qty 3) sizes 3/16 17/64 and Letter P.
-Drills and Taps (Qty 1 ea.) 3/16 17/64 and Letter P with m8x1.25 Tap.
-Manibolt thumbscrew for mounting Bushing Clamps.
-Conical Washer for working around studs.
-M8 Stainless Flatheads (Qty 4).
-Rugged plastic case with laser cut foam fitted for dedicated placement.

CSB-006-F Ford Small Block FULL KIT
Kit includes:
-Template.
-Bushing Clamp (Qty 3) sizes 3/16 1/4 and 5/16.
-Drills and Taps (Qty 1 ea.) 3/16 1/4 and 5/16 with 3/8-16 Tap.
-Manibolt thumbscrew for mounting Bushing Clamps.
-Modified 3/8-16 Stainless Flatheads (Qty 4).
-Rugged plastic case with laser cut foam fitted for dedicated placement.